Відео

Bought two AMS on sale today just for when I grab one of these next month. I can't wait.

Sex dolls that failed

nice advertisement

how to print 800mm by 800mm hot to cut it

I actually think these printers look pretty decent even in 2024. I've looked at dozens of models and have 4 printers. Yes they're not the flashiest or latest anything, but *reliable* out of the box is more important to me than any of that and I don't need to print high speed PLA

How do i make it print slower

Was just about to buy an X1-C and then baby comes into the shop.. BIG price increase for my corner of the world :(

While being sort of cool whats the point if you need to ship it forth and back if you can order it cnc machined probably faster?

I have a question that is a bit off topic. I've recently printed a multiple part print using tpu filament, everything printed without fail. I have now gone back to pla, and nothing will print properly. It appears to be under extruding. I've cleared the nozzle and ptfe tube as well as changed the extruder drive screw. Nothing seems to work, please help.

I have one. It's awesome. Suggestion is to make MORE parts more easily accessible / findable on your website. I had to resort to other resellers for that reason.

Cool ad script

Cool ad script

Overpriced junk.

I hate to say, but the Elmer’s purple glue stick does not help very well with bed adhesion! I think it dries out way too fast to make anything stick long enough!

Where do you get the image converter from? @matterhackers

The audio in this video was recorded using a string and tin can.

Surely you can't print strong enough to make a skateboard truck?

Are you getting paid by the amount of times you say X1E? 😂 It is a pretty sweet looking business class machine though.

Price to license check a print sale? So we pay any royalties to the actual thing license owner. Do you advise where to license a design? Does that site have Migrate our things in? Does that site have Transfer our things to another user's account once there so we can sell them? The most basics being sales.

Excellent video …. It was EXACTLY the information I was looking for ! A million THANK YOU’S !! I’m subscribed !!

Looks very good. 😊

from my experience the problem is commontly a mechanical failure of the stepper motor ball bearings (2 inside one front one back) and their low quality + overtensioning belts (wear and tear). I repaired everything by simply replacing the balls bearings (5mmX16mm with 5 mm shank) plus reduced the tension for the future , so that is just tight enough. Plus you can change the stupid belt that gets damaged over time, even if it is an "expensive" one. So 2 bearings per motor = 1 euro + belt = 3 euros. For 2 motors = 6 euro +the z axis (just bearings) = 7 euros in total. Have fun

If you are manually leveling, with a post-it note or a scrap of paper, using a brim with give you a little bit of time to fine-tune the bed height if the brim isn't sticking, raise the bed until it sticks.

You might want to put a direct link to the product, either in the description, or in the comments. Probably both.

I will put in an order for 5 rolls of MH-Feld ABS, right away! 🤔💭

I think this guy has us covered...

Already got mine 👍🏼 will be having more before the sale ends too ! 😎

I have a V2 I'm taking out of mothballs. 9 years ago I got a sheet of aluminum as I read it was better for ABS warping. I never really got consistent ABS prints as the hot-end could barely get up to temp. 1. Should I use aluminum bed? how do I avoid shorts? I have a couple of small pieces of tape on heated bed (per construction manual) but I do recall warnings about shorting the bed with Aluminum. Do I just need to stay away from the obvious contacts next to where I soldered the LED? 2. There are a couple V2 compatible hot-end upgrades on the SeemeCNC website but the site seems dead - just a clearance warehouse as far as I can tell. They have not responded to e-mails. Should I even consider the rostock specific hot-ends, or are there better options now? It's a shame SeeMeCNC does not appear to have survived. For the year that I was printing (2014) there was a fairly active forum community but it seems to have sputtered out around the time I put my printer away.

Do we have to sand the build plate whenever were going to print?

the little set screw on the gear of my printer came loose.

Does this work for Polymaker PLA Pro?

Wow this s the best software i ever seen simple and easy i love it i might buy the pro version !

I complained on the customer review section about a roll of AnyCubic filament. AnyCubic sent me to this video for educational purposes. I've known for years that there is an opinion that a tangle is impossible unless you let go of the end and take your eyes off it to see where that end went. Certainly, dropping the end COULD result in a user created tangle. Of course that could happen. But the opinion that it's impossible: wrong. It is possible. Being very much aware of the myth (and believing it to be true), I never let go of the end as I opened it and loaded it onto my printer. It jammed up every time I left the room for more than a few minutes. I would straighten a tangle and start again. Then it would jam again. Part of the myth (that it's impossible to have a tangle from the factory) is in the definition of the word. What happens at the factory may not be a "tangle", but it's a trapped loop that get buried under more very tight loops. The fix is to unroll the spool until you release that trapped loop. Then you start printing again and hope there are not more trapped loops. One method I tried with some success is to secure the end of the filament, then put it back in the box and shake it quite a lot. Hopefully that will help those trapped loops to find their way out. Sorry for so many words. By the way, AnyCubic is sending me another roll and I appreciate it.

Can you use abs plastic? As in from sheets?

Why would a printer al of a sudden start doing this with the same temp settings and same type of filament?

bro just helped me with my holiday homeworklol

being made to follow some one elses rules in what you can make is not awesome! the other besides is no privacy and stolen designs, etc you can tell by the fact they will renaming the process of heating it in a furnace to calling it Sintering instead what is the debinding also heating till most the plastic binders flow out??? perhaps under vacuum either way shiesty sounding to me at min Greedy while still controlling Tec

Can I use alcohol to clean the extruder and other partys?

I mixed the part A and part B completely wrong - 1:1 by weight - and I only realized after I had applied it to the whole entire print. I don't have access to a 3D printer for the next 2 weeks and this is supposed to be given as a gift next week. I had planned on doing another coat anyways, so I am thinking I will try to let this harden/ cure and then mix another batch correctly and apply it over? Does this seem like a good plan? Does anyone have any experience with XTC-3D? I also notice a lot of air bubbles, especially when applying in smaller areas with foam brush. Any info or tips would be greatly appreciated.

hello but will any of those do if i need the print to stay put after the bed is cooled down, its during powercuts

I still use Lightwave 3D, 2018 version. Been using it since Amiga days! I'm old, my brain is full... won't allow any other 3D programs to get in, so I stick with Lightwave 3D. Good review on the 3D software scene though... 3D software, 3D scanners and 3D printers... affordable to use at home! What an awesome time to be alive!

Where can I get supports for a Ender 3 Pro 3d printer?

How do I get supports with a Ender 3 Pro 3d printer?

How is that “any image” when you specifically searched “silhouette”? This isn’t any image into 3D. It’s not even a difficult 2D image to 3D. Not a good advertisement for your software.

In my experience.. thin PETG is brittle. Thicker is very flexible.

100 percent infill...? Nope! Annealing is a pass for me.

I don't know what the hell that genre of music is called, but there's a reason it's free. And it's the quickest way to get me to turn your video off.

BRUH, THIS IS FAKE!!!!!!

And in 2024, Ultimaker have become practically unserviceable in the UK, like obtaining belts, accessories and print heads that are now unavailable in the UK and their main suppliers won't ship outside the US and Canada. If like me you unwisely invested £4000+ another £2K in accessories on an Ultimaker 3D printer back in 2021, you're probably as frustrated as I am by the lack of product support just three years on. That seems to be the problem with manufacturers nowadays, they produce so many different models, existing models and support for them become obsolete even before the supposed warranty period expires. I can't deny the Ultimaker S3 is a fantastic printer, if only there was a reliable consistent UK supplier of Ultimaker materials and accessories. Instead of extortionately high prices being demanded from private sellers on eBay. And don't get me started on the S3's lack of connectivity to the Digital Factory Add printer feature, that's the biggest deal-breaker of all. This is my opinion, I could be wrong.

Thank you.